← All projects Project · Automotive

Designing a mount for LED panels in a truck cab

Design, prototyping and small-batch production of a bespoke mount bringing two LED panels together in a truck cab, with protection for the electronics.

  • Automotive
  • Prototype
  • Small batch
  • PETG · ASA
  • September 2025
Designing a mount for LED panels in a truck cab
// ClientTruck driver
// SectorAutomotive
// TechnologyCAD · FDM 3D printing · PETG · ASA
// CompletedSeptember 2025

Client's need

1

Request — Fitting LED panels in a cab

A truck driver, our client was designing illuminated messages to display on LED panels placed behind the windscreen of his truck. He wanted to develop a solution polished enough to then offer it to his colleagues.

He was looking for an elegant and practical way to fit two LED panels in a cab, rather than simply installing them separately.

Starting from his idea and the panels he entrusted to us, we worked on the complete design of a bespoke mount.

Designing a mount for LED panels in a truck cab — Fitting LED panels in a cab
2

Need — Bringing the panels together and protecting them

The mount had to fulfil several functions.

First, the two panels had to be brought together to form a visually consistent whole. But their back also carried all the electronics needed for them to work.

The design therefore had to provide for:

  • assembling the two panels;
  • enough space for the electronics at the back;
  • protection for these components;
  • the necessary cable routes;
  • different fixing options in the cab;
  • a finish neat enough to remain visible behind the windscreen.

The mount had to be designed around the existing panels and their real constraints.

Designing a mount for LED panels in a truck cab — Bringing the panels together and protecting them
3

Our objective — Designing a versatile mount

Our objective was to turn the client's initial idea into a product that was functional, attractive and adaptable.

Rather than imposing a single way of mounting it in the truck, we designed the mount so that it could adapt to different installation methods.

The design also had to anticipate a possible small batch. We therefore had to find a reproducible solution, without losing the ability to develop the product during the first trials.

Designing a mount for LED panels in a truck cab — Designing a versatile mount

Our response

1

Designing around the panels

The physical panels supplied by the client served as the basis for the development.

From their dimensions, their geometry and the layout of the electronics, we designed a frame able to hold the two elements side by side.

Given its dimensions, it could not be printed in one go on our machines. The mount was therefore divided into three parts, designed to be assembled after production and to form a common frame around the two panels.

This design made it possible to overcome the limit of the print volume without reducing the dimensions of the final product.

Designing a mount for LED panels in a truck cab — Designing around the panels
2

Testing and developing

Several iterations were needed before reaching the final model.

The first prototypes made it possible to adjust in particular:

  • the dimensions of the mount;
  • the position of the cable routes;
  • the fixing system;
  • the space available behind the panels;
  • certain aesthetic elements.

These first versions were produced in PETG, well suited to prototyping and strong enough to validate the design.

Successive discussions and trials gradually improved the product until we reached a prototype the client was fully satisfied with.

Designing a mount for LED panels in a truck cab — Testing and developing
3

Producing the small batch

Once the design had been validated, the project moved from prototype to a small batch of 10 complete mounts.

For this final production, we chose to replace the PETG of the prototypes with ASA.

Behind the windscreen of a vehicle exposed to the sun, the temperature can become particularly high. ASA provided more safety against this thermal constraint, while being suited to producing the final parts.

Each set is made up of three assembled parts and holds two LED panels and their electronics.

Designing a mount for LED panels in a truck cab — Producing the small batch
Conclusion

From prototype to series

This project shows the full value of going through several iterations before producing a small batch.

The panels already existed and the general idea was defined. The work consisted of designing everything that would turn them into a product that could really be fitted in a cab: assembly, protection of the electronics, wiring, fixing, aesthetics and choice of material.

The prototypes allowed the client to test the solution and refine certain details before validating his product.

3D printing then made it possible to keep this same manufacturing approach to produce the first 10 units, without requiring any investment in industrial tooling.

In pictures

The project in pictures

Designing a mount for LED panels in a truck cab — photo 1
Designing a mount for LED panels in a truck cab — photo 2
Designing a mount for LED panels in a truck cab — photo 3
Designing a mount for LED panels in a truck cab — photo 4
Designing a mount for LED panels in a truck cab — photo 5
Designing a mount for LED panels in a truck cab — photo 6
Designing a mount for LED panels in a truck cab — photo 7
Designing a mount for LED panels in a truck cab — photo 8
Designing a mount for LED panels in a truck cab — photo 9
“
I called on Osmoz 3D to develop bespoke mounts for my LED panels. They supported me from the design through the various trials, and then all the way to the production of a first batch. The housings were exactly what I expected and I am already planning to entrust them with a new project.
A truck driverLED panel mounts

A similar project to bring to life?

Tell us about your need — we'll get back to you with a recommendation and a quote.

Request a quote